|
|
|
 |
|
Protective Products Frequently Asked Questions:
|
 |
|
|
|
|
|
More Detailed Information
|
|
CARPET PROTECTION
|
|
Superior,
cost-efficient protection for carpets and carpeted stairs.
Saves you time and money. The 3 mil, super-tough polyethylene
film resists puncturing and is coated with a specially
formulated low-tack adhesive that keeps the protection in
place, it's virtually maintenance-free. Reverse wound for
quick, easy application. When the job is done, simply peel it
up, and peel up job site dirt and grime. A special 32" width
(not reverse wound) is designed specifically for carpeted
stairs. A Carpet Protection Applicator is available for high
volume commercial applications
|
Item
No.
|
Description
|
Coverage
(sq. ft.)
|
Wt.
(lbs.).
|
Box
Dimensions
|
Roll
Diameter
|
|
CP-24-0200 |
24" x 200" |
400 |
8 |
25 x 6 x 6 |
4.5" |
|
CP-24-0500 |
24" x 500" |
1,000 |
17 |
25 x 7 x 7 |
5.75" |
|
CP-24-1000 |
24" x 1,000" |
2,000 |
34 |
25 x 9 x 9 |
7.625" |
|
CP-36-0200 |
36" x 200" |
600 |
12 |
37 x 7 x 7 |
4.5" |
|
CP-36-0500 |
36" x 500" |
1,500 |
26 |
37 x 7 x 7 |
5.75" |
|
CP-36-1000 |
36" x 1,000" |
3,000 |
49 |
37 x 9 x 9 |
7.625" |
|
CP-48-0500 |
48" x 500" |
2,000 |
49 |
7 x 7 x 49 |
5.75" |
|
CP-STAIR |
32" x 200" |
534 |
11 |
37 x 7 x 7 |
4.5" |
|
CP-BP |
1 -
CP-24-0200
1 - CP-36-0500 |
1,900 |
34 |
37 x 13 x 7 |
4.5"
5.75" |
|
CP-4 |
4 rolls
CP-24-0200 |
1,600 |
32 |
25 x 10 x 10 |
4.5" |
|
CP-6 |
6 rolls
CP-24-0200 |
2,400 |
48 |
25 x 15 x 10 |
4.5" |
|
|
Q
|
What's the difference between reverse wound and regular
wound? |
|
A
|
Reverse wound is where the sticky/adhesive side is on the
outside of the roll so that when you unroll the product, it
comes off the roll adhesive side down. Regular wound is where
the sticky/adhesive side of the film faces in for ease of
handling on carpeted stairs. (Only the CP-STAIR is regular
wound.) |
|
Q
|
Why can't you put Carpet Protection on natural fiber (wool)
carpet? |
|
A
|
Due to the differences in natural fibers (levels of oils,
enzymes, etc.) we can't guarantee how the adhesive will react.
Some Berbers contain natural fibers. |
|
Q
|
Does Protective Products have a product that can be used on
both carpet and flooring? |
|
A |
All of our products are designed and manufactured for specific
surfaces. Therefore, they are not interchangeable. |
|
Q |
How long can Carpet Protection be left on the carpet? |
|
A |
Carpet Protection may be left on up to a maximum of 45 days but
should be monitored in accordance with the product instructions.
|
|
Q |
What is the mil thickness of the Carpet Protection? |
|
A |
The finished thickness of Carpet Protection is 3 mils.
|
|
Q |
Can I put Carpet Protection on concrete? On wood sub floor? |
|
A |
No. Carpet Protection is intended for use only on domestic
synthetic carpeting. Also, we do not recommend using any
adhesive based products on wood. Dura Runner Plus can be used on
both concrete and hardwood and other hard surfaces. |
|
Q |
Will Carpet Protection leave adhesive on the carpet? |
|
A |
Used as directed, Carpet Protection will protect your carpets
from dirt, grime and other damage, and remove, residue free.
|
|
Q |
If the adhesive transfers onto carpet, what do I use to clean
it? |
|
A |
In
the unlikely event that transfer does occur adhesive can be
removed using a steam extraction method. |
|
Q |
If the adhesive transfers onto other surfaces, what do I use
to clean it? |
|
A |
Carpet Protection should only be used on synthetic carpeting.
Application to other surfaces may cause damage. If you apply
Carpet Protection to a surface other than synthetic carpeting
and adhesive transfer does occur, remove the adhesive in
accordance with the surface manufacturers instructions. Citrus
based cleaners are usually effective if approved for use by the
surface manufacturer. |
|
Q |
In a carpeted basement, will I need a dehumidifier? Is it too
moist? |
|
A |
Carpet Protection should never be used where the conditions
and/or substrate may be damp or subject to moisture
accumulation. |
|
Q |
Do you need an applicator to apply Carpet Protection? |
|
A |
An
applicator is not necessary to apply Carpet Protection and, in
fact, is much easier to apply in most residential applications
without one. However, in large commercial spaces an applicator
will easily pay for itself many times over. |
|
Q |
Can Carpet Protection be reused? |
|
A |
No, Carpet Protection is not reusable. |
|
Q |
Can you use Carpet Protection on any other surface? |
|
A |
No. Carpet Protection is intended for use only on domestic
synthetic carpeting. |
|
Q |
Can I use all roll sizes on the Carpet Protection Applicator? |
|
A |
Both Applicators can accommodate any length roll. The sizes (24"
and 36") however, are not interchangeable. |
|
Q |
Does the Carpet Protection Applicator have an automatic
cutter? |
|
A |
No. For durability, safety, and to keep the cost reasonable we
elected not to incorporate a cutter into our Applicators.
|
|
Q |
Can I use the Carpet Protection Applicator on tile? |
|
A |
Due to the all steel construction of the Applicator, we do not
recommend that it be used on surfaces other than carpeted
floors. |
|
Q |
How long is the Applicators handle? |
|
A |
Approximately 40" |
|
Q |
Is the Applicator awkward to use? |
|
A |
No. As with any tool, proper instructions need to be followed
and a short period of time may be required to get used to the
function of the Applicator. |
|
Q |
How close does the Applicator get to the wall? |
|
A |
You can apply Carpet Protection as close as 2-3 inches from the
wall using an Applicator. |
|
|
|
|
|
|
|
|
More Detailed
Information
|
|
ECONO RUNNER
|
|
Econo Runner offers padded protection against scratches and dents
Reusable, Econo Runner is ideal for dry and cured hardwood, stone,
tile floors ... just about any surface.
Reverse wound for easy application
Slip-resistant tacky, backing holds Econo Runner in place.
Non-porous top surface protects against penetration by paints and
liquids (Seams must be taped) Econo Runner can be used to
protect counters, table tops and more.
Save time, save money and reduce cleanup cost with Econo Runner.
|
Item
No.
|
Description
|
Coverage
(sq. ft.)
|
Wt.
(lbs.)
|
Box
Dimensions
|
Roll
Diameter
|
|
ER-32-0100 |
32" x 100' |
266 |
13 |
111.5 x 11.5 x 32.5 |
9.5" |
|
ST-03e |
3" x 108'
Seam Tape |
27 |
1 |
6 x 6 x 4 |
5" |
|
|
|
|
|
|
|
|
More Detailed
Information
|
|
FLIP GARD
|
|
New
FlipGard is the ideal solution for protecting sliding door thresholds
during construction and remodeling. To install, simply fasten the
FlipGard to the floor on the interior side of the door with nails or
screws. On concrete subfloors us a shot pin or nail/screw into anchors
(dowel rods). Do not fasten the FlipGard to finished flooring.
|
Item No. |
Description |
Length
(inches) |
Wt.
(lbs.) |
Box Dimensions
(inches) |
|
FG-1 |
1 FlipGard |
30 |
1 |
8 x 2.75 x 30.25 |
|
FG-2 |
2 FlipGards |
30 |
2 |
8 x 2.75 x 30.25 |
|
FG-6 |
3 FlipGards |
30 |
7 |
8 x 2.75 x 30.25 |
|
|
|
|
|
|
|
|
More Detailed Information
|
|
FLOOR PROTECTION
|
|
Cost-saving protection for most hard, non-porous surfaces and flooring
such as vinyl or ceramic tile, and is also ideal for keeping grout clean.
The tough polyethylene film resists tears and punctures and is
blue-tinted for easy identification. A low-tack adhesive keeps Floor
Protection in place. Reverse wound for easy application. Ideal for
protecting tub and shower walls. Peels right off when the job is done
& the floor or tile is protected for a fraction the cost of replacing,
repairing or cleaning. Not recommended for hardwood floors.
|
Item
No.
|
Description
|
Coverage
(sq. ft.)
|
Wt
(lbs.)
|
Box
Dimensions
|
Roll
Diameter
|
|
FP-24-0200 |
24" x 200" |
400 |
8 |
25 x 6 x 6 |
4.625" |
|
FP-24-0500 |
24" x 500" |
1,000 |
17 |
25 x 7 x 7 |
5.875" |
|
FP-24-1000 |
24" x 1,000" |
2,000 |
31 |
25 x 9 x 9 |
7.5" |
|
FP-36-0200 |
36" x 200" |
600 |
12 |
37 x 7 x 7 |
4.625" |
|
FP-36-0500 |
36" x 500" |
1,500 |
25 |
37 x 7 x 7 |
5.875" |
|
FP-36-1000 |
36" x 1000" |
3,000 |
46 |
9 x 9 x 37 |
7.5" |
|
FP-BP |
1 -
FP-24-0200
1 - FP-36-0500 |
1,900 |
33 |
37 x 13 x 7 |
4.625"
5.875" |
|
FP-4 |
4
rollsFP-24-0200 |
1,600 |
31 |
25 x 10 x 10 |
4.625" |
|
FP-6 |
6
rollsFP-24-0200 |
2,400 |
45 |
25 x 15 x 10 |
4.625" |
|
|
Q
|
Can I use Floor Protection on Hardwood or Carpet? |
|
A
|
Floor Protection must NEVER be used on hardwood and will not
properly adhere to Carpet. |
|
Q
|
Does Protective Products have a product that can be used on
both carpet and flooring? |
|
A
|
All of our products are designed and manufactured for specific
surfaces. Therefore, they are not interchangeable. |
|
Q
|
How long can I leave Floor Protection on the floor? |
|
A
|
Floor Protection may be left on up to a maximum of 45 days but
should be monitored in accordance with the product instructions. |
|
Q
|
What is the mil thickness of the Floor Protection? |
|
A
|
The finished thickness of Floor Protection is 3 mils. |
|
Q |
Can I put Floor Protection on concrete? On wood sub floor? |
|
A |
Floor Protection cannot be used on concrete. We do not recommend
using any adhesive based products on wood. Dura Runner Plus can
be used on both concrete and hardwood and other hard surfaces.
|
|
Q |
Why can't you put Floor Protection on hardwood? |
|
A |
Any time you use an adhesive based product (Floor Protection) on
hardwood, you run the risk of damaging the finish. |
|
Q |
Can I use Floor Protection on counter tops? |
|
A |
Floor Protection is ideal for use on laminate, solid surface,
tile and other counter tops. You may also want to consider using
Pro Tecta Top for the most durable counter top protection.
|
|
Q |
Will Floor Protection leave adhesive on the floor? |
|
A |
Used as directed, Floor Protection will remove residue free.
|
|
Q |
If the adhesive transfers onto floor, what do I use to clean
it? |
|
A |
In
the unlikely event that transfer does occur, any residue may be
removed with a citrus based cleaner. You should always check
with the manufacturer of the surface before using any type of
cleaning agent. |
|
Q |
Why can't you put Floor Protection on unfinished hardwood
floors? |
|
A |
Unfinished hardwood is very porous and may absorb some of the
chemicals from the adhesive from the Floor Protection, possibly
causing stain to absorb unevenly. |
|
Q |
Can I use Floor Protection on painted walls? |
|
A |
All of our products are designed and manufactured for specific
surfaces and should only be used on the surfaces for which they
are intended. |
|
|
|
|
|
|
|
More Detailed
Information
|
|
HARDWOOD PROTECTION
|
|
Clear, non-slip
reusable vinyl protection for hardwood floors. Hardwood
Protection requires little or no maintenance, and is virtually
puncture-proof. Stays in place without adhesives and can
easily be seamed to protect large areas. It is far superior
and much more cost-efficient in the long run than rosin paper.
Perfect for model homes and tours & the beauty of the hardwood
floor can be seen and appreciated, and at the same time is
totally protected. .
|
Item
No.
|
Description
|
Coverage
(sq. ft.)
|
Wt.
(lbs.)
|
Box
Dimensions
|
Roll
Diameter
|
|
HP-27-0100 |
27" x 100'
(includes 1- ST-03 Seam Tape) |
225 |
54 |
32 x 10 x 10 |
9" |
|
ST-03 |
3" x 108'
Seam Tape |
27 |
1 |
6 x 6 x 4 |
5" |
|
|
Q
|
Is Hardwood Protection reusable? |
|
A
|
Hardwood Protection is reusable. |
|
Q |
How thick is the Hardwood Protection? |
|
A |
Hardwood Protection is slightly thicker than 1/16". |
|
Q |
Can I use Hardwood Protection on stairs? |
|
A |
Hardwood Protection should never be used on stairs. Hardwood
Protection stays in place from weight and surface area covered
and hardwood stairs do not provide the area needed for the
product to work effectively. |
|
Q |
Why can't you put Hardwood Protection on carpeting? |
|
A
|
Hardwood Protection is not adhesive backed and will not stay in
place on carpet, causing a potential hazard. |
|
Q
|
What is the difference between Hardwood Protection and Dura
Runner Plus? |
|
A
|
Hardwood Protection is clear vinyl, which allows the beauty of
the hardwood to be seen while it is protected. Dura Runner Plus
is available in both gray and brown fabric, with non-slip
backing. Hardwood Protection is 27" x 100', while Dura Runner
Plus is available in two sizes, 32" x 50' and 32" x 100'. Dura
Runner Plus is more versatile and may also be used to protect
marble, granite, concrete, vinyl, tile, terrazzo, most natural
stone floors and other hard surfaces. Both products are
reusable. |
|
|
|
|
|
|
|
More Detailed Information
|
|
DURA RUNNER PLUS |
|
Non-adhesive,
reusable protection for hardwood, marble, granite and most
natural stone floors. Also can be used to protect concrete,
vinyl, tile, terrazzo and other hard surfaces. Tough fabric is
combined with a non-slip, non-adhesive backing and is
reverse-wound for quick, easy application. Fabric is absorbent
& excellent for protecting areas where "drips" are a problem.
Available in both gray and brown fabric to complement any
décor..
|
Item No. |
Description |
Coverage
(sq. ft.) |
Wt.
(lbs.) |
Box
Dimensions |
Roll
Diameter |
|
DR-32-G050 |
32" x 50'
Gray |
133 |
16 |
33 x 9 x 9 |
9" |
|
DR-32-B050 |
32" x 50'
Brown |
133 |
16 |
33 x 9 x 9 |
9" |
|
DR-32-G100 |
32" x 100'
Gray |
266 |
30 |
33 x 12 x 12 |
10.5"
- 12 " |
|
DR-32-B100 |
32" x 100'
Brown |
266 |
30 |
33 x 12 x 12 |
10.5"
- 12 " |
|
|
Q
|
Is the Dura Runner Plus waterproof? |
|
A
|
Dura Runner Plus will not be damaged by water and will absorb
it. In addition, the slip resistant backing prevents the water
from getting to the surface below. |
|
Q |
Can the Dura Runner Plus be used on staircases? |
|
A |
Dura Runner Plus should never be used on stairs. Dura Runner
Plus stays in place from weight and surface area covered and
stairs do not provide the area needed for the product to work
effectively. |
|
Q |
Which side is the correct side to place onto the floor? |
|
A |
Dura Runner Plus should always be installed with the fiber side
up. Dura Runner Plus is wound so that when you unroll it the
fiber side will be up. |
|
Q |
Can Dura Runner Plus be used on carpet? |
|
A
|
Dura Runner Plus is not adhesive backed and will not stay in
place on carpet, causing a potential hazard. |
|
Q
|
Will the Dura Runner Plus slip or slide? |
|
A |
Dura Runner Plus has a slip resistant backing that helps to keep
the product in place. |
|
Q |
What is the thickness of the Dura Runner Plus? |
|
A
|
Dura Runner Plus is approximately 1/8" thick. |
|
|
|
|
|
|
|
More Detailed
Information
|
|
SHOE & BOOT COVERS
|
|
Slip over
footwear to protect against dirt, scuffs and heel marks on
carpets and floors, eliminating embarrassing and costly
"tracking" mishaps. Easy-to-use and inexpensive, Shoe & Boot
Covers will increase customer satisfaction and goodwill.
Elastic top holds Shoe & Boot Covers in place and there is a
non-slip sole for safety. Ideal for home tours, open houses,
job estimates and on-site inspections. Available in two sizes
regular and large.
|
|
Q
|
Are the Shoe and Boot Covers washable? |
|
A
|
Shoe and Boot Covers are meant for one time use only.
|
|
Q
|
Are the Shoe and Boot Covers waterproof? |
|
A
|
Shoe and Boot Covers are water resistant not waterproof.
|
|
Q |
Are the Shoe and Boot Covers non-slip? |
|
A |
Shoe and Boot Covers have a slip resistant pattern on the sole.
|
|
Q |
What are the Shoe and Boot Covers made of? |
|
A |
Shoe and Boot Covers are made of a woven fiber material.
|
|
Q |
Will I need to wear shoes with the covers? |
|
A |
Yes. |
|
Q |
Does Protective Products have larger shoe and boot cover
sizes? |
|
A |
The large Shoe and Boot Covers should fit shoe sizes 13 16+ and
are the largest size currently available. |
|
Q |
Will regular shoe covers fit over work boots? |
|
A
|
We
recommend that the large size be used over all sizes of work
boots. |
|
|
|
|
|
|
|
More Detailed Information
|
|
TAKMAT DIRT GRABBER |
|
TakMat cuts the
cost of cleanup by stopping dust and dirt from being tracked
from the job site. 30 sheets per mat, each sheet has a tacky
surface that grabs and removes dust and dirt from footwear.
Once the sheet is dirty, simply peel it off to expose the next
dust-grabbing TakMat sheet. Available in white or blue, TakMat
Dirt Grabber is excellent for controlling "hallway dust and
dirt" on commercial or residential renovation and remodeling
sites.
|
|
Q
|
Will the TakMat Dirt Grabber hold water? |
|
A
|
The TakMat is not designed to hold water and will become
unusable if subject to moisture. |
|
Q
|
Can I put the TakMat on tile or concrete? |
|
A
|
The adhesive backing on the TakMat will adhere safely to tile
but may not properly adhere to concrete. |
|
Q |
How often do I need to change Takmat sheets? |
|
A |
Remove the top sheet as soon as the surface no longer feels
tacky or loses its ability to remove dust and dirt from the
bottom of footwear. |
|
Q |
What is the shelf life of the TakMat Dirt Grabber? |
|
A |
At
least one year when stored in a cool dry location. |
|
Q |
What is the difference between the white and blue TakMats? |
|
A |
Both colors are functionally equivalent. Color is a matter of
visibility and personal preference. |
|
Q |
Can I put the TakMat on wood? |
|
A |
Since the TakMat is adhesive backed we do not recommend that it
be put on a wood surface. |
|
Q |
Does the TakMat come in other sizes? |
|
A
|
Custom sizes are available. Certain restrictions may apply.
Please call us to discuss your needs. |
|
|
|
|
|
|
|
More Detailed Information
|
|
GLASS PROTECTION |
|
A low-tack,
adhesive-backed film that protects glass surfaces and saves
money by reducing cleanup and labor costs. Available in three
grades to meet your application needs and color-coded for easy
identification. Clear polyethylene for short-term protection,
UV resistant red polyethylene for medium term use and
heavy-duty blue PVC for long term. Takes a fraction of the
time to apply (compared to conventional masking methods) and
eliminates scratching and etching caused by mortar, stucco and
over spray. A Multi-Dispenser is available that frees both
hands to allow quick, easy application.
|
Item No. |
Description |
Coverage
(sq. ft.) |
Wt.
(lbs.) |
Box
Dimensions |
Roll
Diameter |
|
GP-12-0600 |
12" x 600' -
Clear |
600 |
8 |
13 x 7 x 7 |
5.625" |
|
GP-24-0600 |
24" x 600' -
Clear |
1200 |
15 |
25 x 7 x 7 |
5.625" |
|
GP-12-R600 |
12" x 600'
See Thru Red |
600 |
8 |
13 x 7 x 7 |
5.375" |
|
GP-24-R600 |
24" x 600'
See Thru Red |
1200 |
15 |
25 x 7 x 7 |
5.375" |
|
GP-12-B660 |
12" x 660'
See Thru Blue |
660 |
18 |
13 x 8 x 8 |
7.125" |
|
GP-24-B660 |
24" x 660'
See Thru Blue |
1320 |
38 |
25 x 7 x 7 |
7.125" |
|
GP-36-B330 |
36" x 330'
See Thru Blue |
990 |
32 |
37 x 7 x 7 |
5.375" |
|
MD-12 |
12"
Multi-Dispenser |
N/A |
4 |
27 x 8 x 8 |
N/A |
|
MD-24 |
24"
Multi-Dispenser |
N/A |
6 |
27 x 8 x 8 |
N/A |
|
|
Q
|
What's the difference between the clear, blue and red Glass
Protection? |
|
A
|
The clear polyethylene is for short term protection, up to 30
days; the red is UV resistant polyethylene for medium term
protection, up to 60 days & the heavy-duty blue PVC is for long
term protection, 180+ days. |
|
Q
|
What is the mil thickness of Glass Protection? |
|
A
|
Clear and Red Glass Protection are both 2 mils. and Blue Glass
Protection is 3 mils. |
|
Q |
Can you put Glass Protection over the frame of windows? |
|
A |
Yes. You can cover the entire window, including any vinyl or
aluminum clad framework. Do not apply Glass Protection to
finished or unfinished wood. |
|
Q |
Can you power wash or spray paint over the Glass Protection
without damaging windows? |
|
A |
Yes. Glass Protection will protect the glass portion of windows
from etching and scratching from mortar, over spray and acid
washing. |
|
Q |
Can you use Glass Protection on counter tops? |
|
A |
Glass Protection can be used on counter-tops. Floor Protection
is a little more durable and would be the preferred product. You
may also want to consider the ProTecta Top for the most durable
counter top protection. |
|
Q |
Will Glass Protection protect against muriatic acid? |
|
A |
Yes. Glass Protection is ideal for protecting against etching
and scratching from acid washing and mortar. |
|
Q |
How can I remove Glass Protection that was left on too long? |
|
A |
First, you must remove the film. You may need to heat it up (a
blow dryer can be used) and then scrape off the film with a
razor blade. Once the film is removed, use mineral spirits or
isopropyl alcohol or a citrus based cleaner to remove the
adhesive. |
|
Q |
Can I use Glass Protection on painted walls? Why or why not? |
|
A
</ | | | |
.